Remington 24, Remington 241

Remington model 24/241

The drawings listed below are scanned off existing factory catalogs, or existing books 
These Illustrated parts Drawings are shown only to help you identify needed parts, they ARE NOT parts that are made or supplied by the host of this website

Most of these illustrations will be from factory catalogs, however some are taken from Frank de Haas's Single Shot Rifle book & are for identification only, & ARE NOT factory part numbers unless identified as such.  This is important as about all obsolete parts suppliers use ONLY factory or closely associated numbers where ever possible so everyone is on the same page.


Note, for some of the older firearms, many over 100 years old, the factories never used what we now know as assembly drawings, but just views of many of the component parts & possibly randomly placed 

Actual load times may take a while as these scanned pictures may be large, & depending on the speed of your computer & server


The parts listed below are for your identification purposes only. 
The author of this website DOES NOT have any parts.





Part numbers listed here are factory part numbers as shown in this illustration.   The model 24 was introduced in 1922 & was updated to a newer version known as the model 241 in 1935 , so many parts may interchange, with the exception of the bolt/extractor system.


 38  Extractor Plunger, (old style) . .
 238  Extractor Plunger, (new hooked style) . .
 49 1/2  Magazine Assembly-Inside . .

Link to internal changes in model 24

. .

This Page Under Construction

Copyright 2006 - 2013  LeeRoy Wisner  with credit given for original illustrations.  All Rights Reserved

Back to Ramblings

Originated  2-05-2006 Last updated 01-12-2013
to contact the author click here