Stevens model 16 Side Lever Crackshot

Actual load times may take a while as these scanned pictures may be large, & depending on the speed of your computer & server

The drawings listed below are scanned off existing factory catalogs, or existing books 
These Illustrated parts Drawings are shown only to help you identify needed parts, they ARE NOT parts that are made or supplied by the host of this website


Most of these illustrations will be from factory catalogs, however some are taken from Frank de Haas's Single Shot Rifle book & are for identification only, & ARE NOT factory part numbers unless identified as such.  This is important as about all obsolete parts suppliers use ONLY factory or closely associated numbers where ever possible so everyone is on the same page.

 

Note, for some of the older firearms, many over 100 years old, the factories never used what we now know as assembly drawings, but just views of many of the component parts & possibly randomly placed 


The Above illustration taken from Frank de Haas Single Shot Rifles & Actions book BUT the numbers changed to match factory part numbers

Note there are 2 versions of the gun.  The early gun has a thumb safety behind the hammer, which utilizes a different hammer, trigger & mainspring


The parts listed below are for your identification purposes only. 
The author of this website DOES NOT have any parts.

1  Barrel with Sights 16  Firing Pin Pin
3  Barrel Screw 20  Frame
4  Breech Block 21  Hammer
5  Side Lever Bushing 22  Hammer Screw
6  Breech Block Plunger 23  Main Spring
7  Breech Block Plunger Spring 24  Main Spring Screw
8  Breech Block Screw 27  Side Lever
9  Side Lever Check Nut 32  Trigger
14-22  Extractor (22 RF) 33  Trigger Screw
14-32  Extractor (32 RF) 34  Trigger Spring
15  Firing Pin 35  Trigger Spring Screw
. . . .

,


Copyright © 2004 - 2013  LeeRoy Wisner  with credit given for original illustrations.  All Rights Reserved

Back to Ramblings

Originated 06-23-06  Last updated 01-12-2013
to contact the author click here